If we encounter a situation where the PC solar panel cracks during use, we must take it seriously, otherwise there may be some serious damage. But why do such problems exist? How to solve it? We will try our best to conduct a thorough analysis through the following article before taking effective measures to address the issue.

The details are as follows: The buyer reported that there is often a problem of cracking when using PC polycarbonate panels. What is the reason for this? Below will introduce this issue to us, hoping to help us understand. First, let's take a look at the skeleton of the PC sun panel, assuming it is uneven or has welding scars and burrs.

It is very simple to cause the board to crack during use, so the skeleton must be flat and there must be no welding scars or burrs, and volatile solutions cannot be used. During construction, try to lay butyl waterproof tape on both sides of the skeleton to create a small sink.

Subsequently, the PC solar panel can be placed on the skeleton and expansion joints should be reserved between the panels; At the same time, press the EPDM pressure strip onto the interface between the boards and stabilize it with self drilling screws. For the board against the wall that cannot touch directly with the wall, instead use angle aluminum to stabilize it on the wall, and then put it in. Once stabilized, it can effectively prevent the board from cracking in the future.